Torque & Tension Laboratory & Consulting – Decision Rule of Conformity

ISO 17025:2017 Clause 7.1.3 states the following:

When a customer requests a statement of conformity to a specification or standard for the test or calibration (e.g. pass/fail, in-tolerance/out-of-tolerance), the specification or standard and the decision rule shall be clearly defined. Unless inherent in the requested specification or standard, the decision rule selected shall be communicated to, and agreed with, the customer.

In Compliance to the ISO 17025:2017 Standard, Torque and Tension Laboratory & Consulting maintains the following decision rule of conformity:

Measurement Uncertainty is not factored into tolerances