In the vast majority of threaded fastener applications, there are valid reasons for opting for nuts or locknuts with flanges instead of using the “un-flanged” nut with a washer. If the application calls for a deflected-thread all-metal locknut, there are additional reasons. This blog entry will identify those reasons and provide supporting arguments....Read More
2 Comments Click here to read/write comments
For prevailing torque locknut applications where assembly and in-service performance are critical, it becomes appropriate to enhance the requirements and qualification tests of the locknut, beyond what may be called for in a consensus locknut standard. One common requirement enhancement is Torque-Tension Repeatability. Though the concept of this performance metric is easy to understand, defining ...Read More
0 Comments Click here to read/write comments
Since RoHS became effective in the European Union in 2006, there has been a global push to eliminate Cadmium (among other substances) from use in fasteners. Cadmium plating provides a level of lubricity that helps prevent galling in all-metal locknuts, and contributes to a more consistent torque tension characteristic in threaded assemblies....Read More
0 Comments Click here to read/write comments
Nylon Insert locknuts are very popular, attributable to the following characteristics: in popular sizes they are relatively inexpensive and easy to find starting the assembly is easy as the threads are standard until the nylon ring is encountered prevailing torque is consistent and usually low within the tolerance band there is no risk of galling or seizure during assembly...Read More
0 Comments Click here to read/write comments
You can't be in the locknut business very long without encountering someone having problems with locknuts in their applications. When a locknut manufacturer's registered quality system includes rigorous quality controls, their parts pass the qualification tests, and there are still problems on the customer's assembly line, what happened? The short answer is that sometimes there are ...Read More
0 Comments Click here to read/write comments
The prevailing torque in prevailing torque locknuts comes from localized plastic deformation to an interference fit with continuous sliding during assembly. Let's break this down. Localized plastic deformation - Some of the starting threads need to be able to accept the mating part (bolt, say) before the prevailing torque begins. The interference is therefore localized to not include the ...Read More
0 Comments Click here to read/write comments
In addition to inspections common to all internally threaded fasteners (nuts), prevailing torque locknuts are inspected for prevailing torque performance. Prevailing torque is the resistance to assembling or disassembling the locknut and mating part when the assembly is not clamping (not developing tension in the mating part)...Read More
0 Comments Click here to read/write comments
Sometimes there is no standard locknut that will satisfy the requirements of an application. In these instances, a locknut fulfilling special requirements should be defined in a controlled document that specifies the characteristics listed in Part 1. That requirements document (an engineering drawing, for example) should reference standards for as many characteristics as possible...Read More
0 Comments Click here to read/write comments
There are several characteristics of prevailing torque locknuts that should be included in a complete specification. For many of these characteristics, it is equally important to define how the characteristic is measured...Read More
0 Comments Click here to read/write comments